Denon AVR-3801 manual 7SETTING UP THE SYSTEM, SYSTEM SETUP button, CURSOR buttons, ENTER button

7SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-3801’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-3801.

•Use the following buttons to set up the system:

DISPLAY		MENU
SURR.		OSD
PARA.
SETUP		RETURN
	TUNING	A/B
		MEMORY
BAND		MODE
CHANNEL		VOLUME
+	TUNING	+
SKIP	ENTER
-	SHIFT	-
SKIP	MUTING
TUNER	PHONO	CD

SYSTEM SETUP button

Press this to display the system setup menu.

CURSOR buttons

Fand G: Use these to move the cursors (F and G) to the left and right on the screen.

Dand H: Use these to move the cursors (D and H) to the up and down on the screen.

ENTER button

Press this to switch the display.

Also use this button to complete the setting.

• System setup items and default values (set upon shipment from the factory)

System setup

Default settings

q

Power AMP

Set this to switch the surround back channel’s power amplifier for

Surround Back

Assignment

use for multi-zone.

Input the combination of speakers in your system and their

Front Sp.

Center Sp.

Surround Sp.

Surround Back Sp.

Sub Woofer

Speaker

corresponding sizes (SMALL for regular speakers, LARGE for full-

A / B

Configuration

size, full-range) to automatically set the composition of the signals

Large

Small

Small

Small / 2spkrs

Yes

output from the speakers and the frequency response.

Use this function when using multiple surround speaker

Surround

DOLBY/

5CH/7CH

DSP

—

—

DTS

EXT. IN

w

(Surround

combinations for more ideal surround sound. Once the

mode

STEREO

SIMULATION

SURROUND

combinations of surround speakers to be used for the

Speaker

different

surround modes are preset, the surround

Setting)

Surround

speakers

are selected automatically according to the

A

A

A

A

—

—

surround mode.

speaker

(Subwoofer mode)

This selects the subwoofer speaker for playing deep bass signals.

LFE

e

DTS-ES/6.1

Set the method of playing the surround back channel for digital

DTS-ES / 6.1 Source Auto = OFF

Source Auto

signals.

r Delay Time

This parameter is for optimizing the timing with which the audio

Front L & R

Center

Surround L & R

SBL & SBR

Sub Woofer

signals are produced from the speakers and subwoofer according to

12 ft (3.6 m)

12 ft (3.6 m)

10 ft (3.0 m)

10 ft (3.0 m)

12 ft (3.6 m)

the listening position.

Channel

This adjusts the volume of the signals output from the speakers and

Front L

Front R

Center

Surround

Surround

Surround

Surround

Subwoofer

t

L

R

Back L

Back R

subwoofer for the different channels in order to obtain optimum

Level

effects.

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

Input

CD

DVD

VDP

TAPE

TV/DBS

VCR-1

VCR-2

—

—

Digital In

This assigns the digital input jacks for the different input

source

y

Assignment

sources.

Digital

COAXIAL

OPTICAL 1

OPTICAL 2

OPTICAL 3

OFF

OFF

OFF

—

—

Inputs

u

Multi

This sets the output level for the mult output jacks.

0 dB

vol. Level

i

On Screen

This sets

whether or not to display the on-screen display that

On Screen Display = ON

appears on the monitor screen when the controls on the remote

Display

control unit or main unit are operated.

A1 ~ A8

87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

B1 ~B8

520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz

o

Auto Tuner

FM stations are received automatically and stored in the memory.

C1 ~C8

90.1 MHz

Presets

D1 ~D8

90.1 MHz

E1 ~E8

90.1 MHz

NOTES:

•The on-screen display signals are not output from the color difference (component) video signal (MONITOR OUT) jacks.

•The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-3801’s S-Video and video monitor output jacks and signals are input to the AVR-3801 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 28.)

•The AVR-3801’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions.

•The setup menu is not displayed when “HEADPHONE ONLY” is selected.

16