Connecting a DVD player DVD in jacks | Denon AVR-3801 instruction

Connecting a Video Component Equipped with Color Difference (Component - Y, CR, CB) Video Jacks (DVD Player)

•When making connections, also refer to the operating instructions of the other components.

•The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.

•The AVR-3801’s on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT).

•Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output.

DVD player

Connecting a DVD player

DVD IN jacks

• Connect the DVD player’s color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω /ohms coaxial video pin-plug cords.

•In the same way, another video source with component video outputs such as a TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks.

Monitor TV

Connecting a monitor TV

MONITOR OUT jack

• Connect the TV’s color difference (component) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 Ω /ohms coaxial video pin- plug cords.

•The color difference input jacks may be indicated differently on some TVs, monitors or video components (“CR, CB and Y”, “R-Y, B-Y and Y”, “Pr, Pb and Y”, etc.). For details, carefully read the operating instructions included with the TV or other component.

10

Image 11

Denon AVR-3801 manual Connecting a DVD player DVD in jacks, Connecting a monitor TV Monitor OUT jack

Contents

AVR-3801 Page Safety Precautions Safety Instructions Before Using Table of Contents Features Connections Connecting the audio components Connecting video components Connecting the video decks Connecting a video component equipped with S-Video jacksPrecaution when using S-jacks Connecting a monitor TV AM loop antenna assembly FM antenna adopter assembly Connecting the antenna terminals Connecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacks Connecting the Multi Zone jacks Connecting the external input EXT. in jacks Connections Connecting banana plugsPrecautions when connecting speakers Speaker system connections Protector circuit Surround Speaker A/B Surround speaker system indicatorsPart Names and Functions Front Panel DISPLAY/SURR. Para Remote control unit Cursor buttons Setting UP the SystemSystem Setup button Press this to display the system setup menu Surround speaker selector function Setting the type of speakers Before setting up the systemSetting the power amplifier assignment Parameters Subwoofer mode Setting the Subwoofer modeAssignment of low frequency signal range Preparations Setting the delay timeSetting OFF Set the distance between Delay Time screen appears automaticallyOnce Meters or Feet is selected in , Select the speaker to be set Switch to the Channel Level screen Select Test Tone Mode Setting the channel level Is the same Select Test Tone StartSelect Yes To select the digital input jack Setting the Digital In AssignmentTo select the input source Multi Vol. Level Setting the on-screen display OSDSet the multi pre-out output level adjustment Switch to the On Screen Display screen Select on or OFF Press the Enter button Auto Preset Memory screen appears Auto tuner presets On-screen display signals After completing system setup Inserting the batteries Remote Control UnitUsing the remote control unit Tape deck Tape system buttons Operating Denon audio componentsCD player CD system buttons MD recorder MD, CD recorder CDR system buttons Learn ResetEnter Code Code no Operating a component stored in the preset memory Checking the preset memory settings Operate the component Learning function System call buttons Storing system call signalsSYS Mode System call Resetting the system call buttons ResettingUsing the system call function Resetting the preset memory Reset PRE Reset LRNReset ALL Reset SYS SYS Mode SYS Call Resetting learned buttons All reset function Auto search function Refer to Connections pages 6 to 13 and check that all Turn on the power Press the Power switch buttonOperation Before operating Select the input source to be played To select the input source when RECInput mode selection function Playing the input source Example Stereo Input mode displayInput signal display Turning the sound off temporarily Muting Adjusting the sound quality ToneListening over headphones After starting playback Checking the currently playing program source, etc Playing one source while recording another REC OUT modeMulti-source recording/playback Multi source switches Display switches as follows eachThis operation is not possible in the REC OUT mode Select Multi using Mode Playback using the external input EXT. in jacksPress the EXT. in to switch External input Set the external input EXT Multi Room Music Entertainment System Multi-source and multi-zone playback Before playing with the surround function Surround Fader function Dolby Surround Pro Logic mode When playing sources On which Set the input mode to Auto or DTSSelect the Dolby/DTS Surround mode Signal Detect indicator lights LFE Low Frequency Effect 7.1 SurroundSurround parameters q Cinema EQ. Cinema Equalizer COMP. Dynamic Range Compression Personal Memory Plus Surround modes and their featuresDSP Surround Simulation Set the parameters DSP surround simulation Press the Surround Parameter button When turned clockwiseWhen turned counterclockwise Tone control setting Music Cinema Tuner Auto tuningManual tuning Listening to the Radio Checking the preset stations Preset memory Initialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Movie audio Types of multi-channel signalsAdditional Information Number of surround back speakers Surround back speakers Speaker setting examples When not using surround back speakers When using different surround speakers for movies and music Dolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 2Dolby Digital and Dolby Pro Logic DTS compatible media and playback methods DTS Digital SurroundDolby Pro Logic Dolby Pro Logic compatible media and playback methods DTS Neo6 Cinema DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6TM surround DVD VDP Tape TV/DBS VCR-1 VCR-2 Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan