After starting playback, Listening over headphones | Denon AVR-3801

After starting playback

[1] Adjusting the sound quality (TONE)

The tone control function will not work in the direct mode.

1	The tone switches as follows each time the TONE CONTROL
	The tone switches as follows each time the TONE CONTROL
	button is pressed.
	TONE
	CONTROL
	BASS	TREBLE
2	(Main unit)
2	With the name of the volume to be	SELECT

adjusted selected, turn the SELECT knob to adjust the level.

(Main unit)

•To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)

•To decrease the bass or treble: Turn the control clockwise. (The bass or treble sound can be decreased to up to –12 dB in steps of 2 dB.)

[2]Listening over headphones

	1	Connect the headphones to the	PHONES
	1	PHONES jack of the front panel.


			1
	2	Press the OUTPUT button to play the sound over the
		Press the OUTPUT button to play the sound over the
		headphones only.

TV/	0	+10
VCR	0	+10
OUTPUT			2
TEST	SPEAKER	OUTPUT
TONE	SPEAKER	OUTPUT
	SURROUND
DOLBY/DTS	DSP	5CH / 7CH
SURROUND	SIMU.	STEREO

•The output to the speaker and pre-out jacks is turned off and no sound is produced from the speakers.

Caution: Switching off the power of the unit and the unit will cancel the settings.

[3] Turning the sound off temporarily (MUTING)

1	Use this to turn off the audio output
	Use this to turn off the audio output
	temporarily.	MUTING
	Press the MUTING button.

Cancelling MUTING mode.

Press the MUTING button again.

(Remote control unit)

NOTE:

To prevent hearing loss, do not raise the volume level excessively when using headphones.

TUNING

+		+
SKIP	ENTER	+
-	SHIFT	-
SKIP	MUTING	-	1
TUNER	PHONO	CD	1

1 2 3

44

Image 45

Denon AVR-3801 manual After starting playback, Adjusting the sound quality Tone, Listening over headphones

Contents

AVR-3801 Page Safety Precautions Safety Instructions Before Using Table of Contents Features Connections Connecting the audio components Connecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a monitor TV Connecting the video decks AM loop antenna assembly FM antenna adopter assembly Connecting the antenna terminals Connecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacks Connecting the Multi Zone jacks Connecting the external input EXT. in jacks Precautions when connecting speakers Connecting banana plugsSpeaker system connections Connections Protector circuit Part Names and Functions Surround speaker system indicatorsFront Panel Surround Speaker A/B DISPLAY/SURR. Para Remote control unit System Setup button Setting UP the SystemPress this to display the system setup menu Cursor buttons Surround speaker selector function Before setting up the system Setting the power amplifier assignmentSetting the type of speakers Parameters Setting the Subwoofer mode Assignment of low frequency signal rangeSubwoofer mode Setting Setting the delay timeOFF Preparations Once Meters or Feet is selected in , Delay Time screen appears automaticallySelect the speaker to be set Set the distance between Switch to the Channel Level screen Select Test Tone Mode Setting the channel level Select Test Tone Start Select YesIs the same Setting the Digital In Assignment To select the input sourceTo select the digital input jack Set the multi pre-out output level adjustment Setting the on-screen display OSDSwitch to the On Screen Display screen Select on or OFF Multi Vol. Level Press the Enter button Auto Preset Memory screen appears Auto tuner presets On-screen display signals After completing system setup Remote Control Unit Using the remote control unitInserting the batteries CD player CD system buttons Operating Denon audio componentsMD recorder MD, CD recorder CDR system buttons Tape deck Tape system buttons Enter Code ResetCode no Learn Operating a component stored in the preset memory Checking the preset memory settings Operate the component Learning function SYS Mode Storing system call signalsSystem call System call buttons Resetting Using the system call functionResetting the system call buttons Reset ALL Reset SYS Reset PRE Reset LRNSYS Mode SYS Call Resetting the preset memory Resetting learned buttons All reset function Auto search function Operation Turn on the power Press the Power switch buttonBefore operating Refer to Connections pages 6 to 13 and check that all Input mode selection function To select the input source when RECPlaying the input source Select the input source to be played Input mode display Input signal displayExample Stereo Listening over headphones Adjusting the sound quality ToneAfter starting playback Turning the sound off temporarily Muting Playing one source while recording another REC OUT mode Multi-source recording/playbackChecking the currently playing program source, etc This operation is not possible in the REC OUT mode Display switches as follows eachSelect Multi using Multi source switches Press the EXT. in to switch External input Playback using the external input EXT. in jacksSet the external input EXT Mode Multi Room Music Entertainment System Multi-source and multi-zone playback Before playing with the surround function Surround Fader function Dolby Surround Pro Logic mode Select the Dolby/DTS Surround mode Set the input mode to Auto or DTSSignal Detect indicator lights When playing sources On which Surround parameters q Cinema EQ. Cinema Equalizer 7.1 SurroundCOMP. Dynamic Range Compression LFE Low Frequency Effect Surround modes and their features DSP Surround SimulationPersonal Memory Plus Set the parameters DSP surround simulation When turned clockwise When turned counterclockwisePress the Surround Parameter button Tone control setting Music Cinema Manual tuning Auto tuningListening to the Radio Tuner Checking the preset stations Preset memory Recalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Types of multi-channel signals Additional InformationMovie audio Number of surround back speakers Surround back speakers Speaker setting examples When not using surround back speakers When using different surround speakers for movies and music Dolby Surround Dolby Digital Dolby Surround AC-3 Surround2Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methods Dolby Pro Logic DTS Digital SurroundDolby Pro Logic compatible media and playback methods DTS compatible media and playback methods DTS-ESTMMatrix DTS-ESTMDiscreteDTS Neo6TM surround DTS Neo6 Cinema DVD VDP Tape TV/DBS VCR-1 VCR-2 Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan