Denon AVR-3801 Playback using the external input EXT. in jacks, Set the external input EXT, Mode

Playback using the external input (EXT. IN) jacks

1	Set the external input (EXT.
	EXT.IN
	IN) mode.	EXT.IN
	Press the EXT. IN to switch
	the external input.
	(Main unit)	(Remote control unit)

Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the EXT. IN jacks are output directly to the front (left and right), center, surround (left and right) and surround back (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry. In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack.

2	Cancelling the external input mode
	To cancel the external input (EXT. IN) setting, press the input
	mode (AUTO, PCM, DTS) or ANALOG button to switch to the
	desired input mode. (See page 42.)
	AUTO	PCM	DTS	ANALOG
				MODE	ANALOG

(Main unit) (Remote control unit)

•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5/7CH STEREO, WIDE SCREEN or DSP SIMULATION) cannot be set.

	6.1 / 7.1	DIRECT	STEREO
	SURROUND
2		INPUT
	MODE	ANALOG	EXT.IN	1
	SYSTEM CALL
	CALL 1	CALL 2	BACKLIGHT

NOTES:

•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

47