![](/images/new-backgrounds/1033294/3329443x1.webp)
2
3
Select the desired setting.
TUNING |
|
| We recommend setting this to |
BAND | MODE |
| “OFF”. |
TUNING | When set to “ON”, the |
| operation for software for which |
| no identification signals are |
| recorded is set. |
ENTER | Enter the setting. |
| The System Setup Menu reappears. |
SHIFT |
|
Setting |
|
OFF | Set the “OFF” mode to perform |
| identification signal described below is not recorded. |
ON | This function only works with software on which a special identification signal is recorded. This software is scheduled to go on |
| sale in the future. |
| This is a function for automatically playing in the |
| in 6.1 Source or |
| recorded in 6.1 Source or |
5 ch | Playback is conducted without using the surround back speaker. |
7 ch | Playback is conducted using the surround back speaker. The same signals as those of the surround channels are output from the |
| surround back channel. |
NOTES:
•The
•The surround back speakers can also be turned on and off using the “6.1/7.1 Surround” surround parameter. (See page 51.) Select the setting according to the program source to be played.
Setting the delay time
•Input the distance between the listening position and the different speakers to set the delay time for the surround mode.
•The delay time can be set separately for surround speakers A and B.
Preparations:
Measure the distances between the listening position and the speakers (L1 to L5 on the diagram at the right).
L1: Distance between center speaker and listening position
L2: Distance between front speakers and listening position
L3: Distance between surround speakers and listening position
L4: Distance between surround back speakers and listening position
L5: Distance between subwoofer and listening position
FL | Center |
| FR |
Subwoofer | L1 L2 |
|
|
| L5 |
| Listening position |
|
|
| |
SL | L3 | L4 | SR |
| |||
SBL |
|
| SBR |
1 | At the System Setup Menu select “Delay Time”. |
| |
| TUNING |
BAND | MODE |
| TUNING |
21