![](/images/new-backgrounds/1033294/3329437x1.webp)
Before setting up the system
1 | Check that all the connections are correct, then turn on the main unit’s power. |
2 SETUP
Display the System Setup Menu.
Setting the power amplifier assignment
Make this setting to switch the power amplifier for the surround back channel to Multi.
1 | TUNING | ENTER |
|
|
At the System Setup Menu, select “Power Amp Assignment” and press the ENTER button
BAND | MODE | SHIFT |
TUNING
2 | Select “Surround Back” to use as the surround back |
channel, “Multi” to use as multi zone out. |
TUNING
BANDMODE
TUNING
When “Surround Back” is selected | When “Multi” is selected |
3 | ENTER |
SHIFT |
Enter the setting.
The System Setup Menu reappears.
Setting the type of speakers
•The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.
1 | At the System Setup Menu select “Speaker Configuration”. |
| |
| TUNING |
BAND | MODE |
| TUNING |
18