Dell 9.7(0.0) manual Enter the keyword direction then one of the packet

Defaults

Command Modes

Command History

Example

direction {rx tx	Enter the keyword direction then one of the packet
both}	directional indicators.
	• rx: to monitor receiving packets only.
	• tx: to monitor transmitting packets only.
	• both: to monitor both transmitting and receiving
	packets.

none

MONITOR SESSION (conf-mon- sess-session-ID)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.4.0.0Added support for Source and destination.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

7.4.1.0Introduced on the E-Series.

Dell# monitor session 0

source Port-channel 10 destination TenGigabitEthernet 1/33 direction tx

Port Monitoring 1221