Related Commands

VersionDescription

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the C-Series and S-Series.

private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.

private-vlan mapping secondary-vlan — maps secondary VLANs to the selected primary VLAN.

show arp — displays the ARP table.

switchport mode private-vlan — sets PVLAN mode of the selected port.

private-vlan mode

Set PVLAN mode of the selected VLAN to community, isolated, or primary.

S6000

Syntax[no] private-vlan mode {community isolated primary}

Parameters

Defaults

Command Modes

Command History

To remove the PVLAN configuration, use the no private-vlan mode {community isolated primary} command syntax.

community

Enter the keyword community to set the VLAN as a

 

community VLAN.

isolated

Enter the keyword isolated to configure the VLAN as an

 

isolated VLAN.

primary

Enter the keyword primary to configure the VLAN as a

 

primary VLAN.

none

 

INTERFACE VLAN

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1224

Private VLAN (PVLAN)

Page 1224
Image 1224
Dell 9.7(0.0) manual Private-vlan mode, Syntaxno private-vlan mode community isolated primary, Isolated