Dell 9.7(0.0) Upgrade system stack-unit, Upgrade boot system stack-unit all stack-unit-number a B

NOTE: Any scripts used to streamline the stacking configuration process must be updated to reflect the Command Mode change from EXEC Privilege to CONFIGURATION to allow the scripts to work correctly.

upgrade system stack-unit

Copy the boot image or Dell Networking OS from the management unit to one or more stack members.

Syntax

Parameters

Defaults

Command Modes

Command History

upgrade {boot system} stack-unit {all stack-unit-number A B}

boot	Enter the keyword boot to copy the boot image from the
	management unit to the designated stack members.
system	Enter the keyword system to copy the Dell Networking OS
	image from the management unit to the designated stack
	members.
stack-unit	Enter the stack-unit number. For the S6000, the range is
	from 0 to 5.
all	Enter the keyword all to copy the designated image to all
	stack members.
A	Enter the keyword A to upgrade all stacked units in System A
	( only).
B	Enter the keyword B to upgrade all stacked units in System B
	( only).
none
EXEC

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

Usage	To reboot using the new image, use the upgrade boot system stack-unit
Information	command.

Stacking 1539