Dell 9.7(0.0) manual Show ip igmp interface, Syntaxshow ip igmp vrf vrf-name interface interface

show ip igmp interface

View information on the interfaces participating in IGMP.

S6000

Syntaxshow ip igmp [vrf vrf-name] interface [interface]

Parameters	(OPTIONAL) Enter the keyword vrf followed by the name of
vrf vrf-name
	the VRF to view IGMP interfaces associated with that VRF.
interface	(OPTIONAL) Enter the interface type and slot/port
	information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a Loopback interface, enter the keyword loopback
	then a number from 0 to 16383.
	• For a port channel interface, enter the keywords port-
	channel then a number.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.

Command Modes

Command History

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command.

650 Internet Group Management Protocol (IGMP)