Dell 9.7(0.0) manual Commands to Configure DNS, Ip name-server

DHCP Binding File Details		: 0
Invalid File
Invalid	Binding Entry	:	0
Binding	Entry lease expired	:	0

Dell#

Commands to Configure DNS

To configure the Domain Names Systems (DNS) on the system, use the following commands:

ip name-server

Configures the name server IP addresses for VRF. Using this command, you can configure up to a maximum of six IP addresses per VRF.

Syntax

ip name-server [vrf vrf-name] ip-address[ip-address2] [ip- address3] [ip-address4] [ip-address5] [ip-address6]

To undo the name server ip address configuration for VRF, use the no ip name- server [vrf vrf-name]ip-addresscommand.

Parameters

Defaults

Command Modes

vrf vrf-name

ip-address [ip- address2] [ip- address3] [ip- address4] [ip- address5] [ip- address6]

None

CONFIGURATION

(Optional) Enter the key word vrf and then the name of the VRF to configure the name server IP addresses for that VRF.

Enter the IP address of the name server in dotted decimal format.

NOTE: Use the additional ip-addressparameters (ip- address2 to ip-address6) in a sequential order to specify up to a maximum of six IP addresses per VRF.

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Introduced on the S-Series and Z-Series.

578 Dynamic Host Configuration Protocol (DHCP)