redistribute

Redistribute routes from one routing domain to another routing domain.

Syntaxredistribute {static connected rip} [level-1 level-1-2 level-2] [metric metric-value] [metric-type {external internal}] [route-map map-name]

To end redistribution or disable any of the specified keywords, use the no redistribute {static connected rip} [metric metric-value][metric-type {external internal}] [level-1 level-1-2 level-2][route-mapmap-name]command.

Parameters

Defaults

Command Modes

connected

Enter the keyword connected to redistribute active routes

 

into IS-IS.

rip

Enter the keyword rip to redistribute RIP routes into IS-IS.

static

Enter the keyword static to redistribute user-configured

 

routes into IS-IS.

metric metric-

(OPTIONAL) Assign a value to the redistributed route. The

value

range is from 0 to 16777215. The default is 0. Use a value that

 

is consistent with the destination protocol.

metric-type

(OPTIONAL) The external link type associated with the

{external

default route advertised into a routing domain. Specify one

internal}

of the following:

 

•

external

 

•

internal

level-1

(OPTIONAL) Routes are independently redistributed into IS-

 

IS as Level 1 routes.

level-1-2

(OPTIONAL) Routes are independently redistributed into IS-

 

IS as Level-1-2 routes.

level-2

(OPTIONAL) Routes are independently redistributed into IS-

 

IS as Level 2 routes. This setting is the default.

route-map

(OPTIONAL) If you do not enter the route-map argument, all

map-name

routes are redistributed. If a map-name value is not specified,

 

no routers are imported.

•metric metric-value = 0

•metric-type= internal; level-2

•ROUTER ISIS (for IPv4)

•CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

888

Intermediate System to Intermediate System (IS-IS)

Page 888
Image 888
Dell 9.7(0.0) manual Redistribute, Parameters Defaults Command Modes Connected, Metric-type, Internal