Dell 9.7(0.0) manual Netbios-name-server, Netbios-node-type type, Enter the Netbios node type

netbios-name-server

Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

netbios-name-serveraddress [address2...address8]

address	Enter the address of the NETBIOS name server. You may
	enter up to eight, in order of preference.
none
DHCP <POOL>

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the C-Series and S-Series.

netbios-node-type

Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying clients as hybrid.

S6000

Syntax	netbios-node-type type
Parameters	type	Enter the NETBIOS node type:

• Broadcast: Enter the keyword b-node.

• Hybrid: Enter the keyword h-node.

• Mixed: Enter the keyword m-node.

• Peer-to-peer: Enter the keyword p-node.

554 Dynamic Host Configuration Protocol (DHCP)