Dell 9.7(0.0) manual Show isis interface, Show isis vrf vrf-name interface interface

VersionDescription

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

Example	Dell#show isis hostname
	System Id	Dynamic Name Static Name
	*F100.E120.0013 Force10		ISIS
	Dell#

show isis interface

Display detailed IS-IS interface status and configuration information.

S6000

Syntax

Parameters

Command Modes

Command History

show isis [vrf vrf-name] interface [interface]

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to display IS-IS interface status information
	corresponding to that VRF.
interface	(OPTIONAL) Enter the following keywords and slot/port or
	number information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a Loopback interface, enter the keyword loopback
	then a number from 0 to 16383.
	• For a port channel interface, enter the keywords port-
	channel then a number.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Intermediate System to Intermediate System (IS-IS) 901