Dell 9.7(0.0) manual Role mode addrole deleterole role-name reset command, Addrole, Deleterole

	1.	Locally define a system administrator user role.This will give you access to
		login with full permissions even if network connectivity to remote
		authentication servers is not available.
	2.	Configure login authentication on the console. This ensures that all users are
		properly identified through authentication no matter the access point
	3.	Specify an authentication method (RADIUS, TACACS+, or Local).
	4.	Specify authorization method (RADIUS, TACACS+ or Local).
	5.	Verify the configuration has been applied to the console or VTY line.
Related	login authentication, password, radius-server host, tacacs-server host
Commands

role

Changes command permissions for roles.

Syntax	role mode { { { addrole deleterole } role-name} reset } command
	To delete access to a command, use the no role mode role-name
Parameters	mode	Enter one of the following keywords as the mode for which
		you are controlling access:
		configure for CONFIGURATION mode
		exec for EXEC mode
		interface for INTERFACE modes
		line for LINE mode
		route-map for Route-map mode
		router for Router mode
	addrole	Enter the keyword addrole to add permission to the
		command. You cannot add or delete rights for the sysadmin
		role.
	deleterole	Enter the keyword deleterole to remove access to the
		command. You cannot add or delete rights for the sysadmin
		role.
	role-name	Enter a text string for the name of the user role up to 63
		characters. These are 3 system defined roles you can modify:
		secadmin, netadmin, and netoperator.
	reset	Enter the keyword reset to reset all roles back to default for
		that command.

1452 Security