22

Interfaces

The commands in this chapter are supported by Dell Networking operating software on the S6000 platform.

This chapter contains the following sections:

•Basic Interface Commands

•Port Channel Commands

This chapter contains the following sections:

•Basic Interface Commands

•Port Channel Commands

•Time Domain Reflectometer (TDR)

•UDP Broadcast

Basic Interface Commands

The following commands are for Physical, Loopback, and Null interfaces.

clear counters

Clear the counters used in the show interfaces commands for all virtual router redundancy protocol (VRRP) groups, virtual local area networks (VLANs), and physical interfaces, or selected ones.

S6000

Syntax

clear counters [interface] [vrrp [ipv6 {vrid} learning-limit

 

vlan vlan-id]

 

Parameters

interface

(OPTIONAL) Enter any of the following keywords and slot/

 

port or number to clear counters from a specified interface:

• For IPv4 access-group counters, enter the keyword ip.

• For IPv6 access-group counters, enter the keyword ipv6.

• For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.

• For MAC access-group counters, enter the keyword mac.

• For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

• For the management interface on the RPM, enter the keyword ManagementEthernet then slot/port

664

Interfaces

Page 664
Image 664
Dell 9.7(0.0) manual Interfaces, Basic Interface Commands, Clear counters interface vrrp ipv6 vrid learning-limit