Related
Commands
reload — Exit from this mode and reload FTOS.
ignore startup-config
During a reload, do not load the startup-config file.
S6000
Syntax ignore startup-config
Defaults disabled
Command
Modes
BOOT_USER
Command
History Version 9.0.2.0 Introduced on the S6000.
Usage
Information Use this command if you have authentication procedures in the startup-config
other than the enable-password setting.
interface management ethernet ip address
Assign an IP address to the Management Ethernet interface.
S6000
Syntax [no] interface management ethernet ip address ip-address mask
To delete the IP address, enter no interface management ethernet ip address.
Defaults Not configured.
Command
Modes
BOOT_USER
Command
History Version 9.0.2.0 Introduced on the S6000.
Usage
Information In the runtime CLI, use the ip address command in INTERFACE mode to change
the Management interface’s IP address.
To view the current IP address configured on the Management interface, enter the
show interfaces management ethernet command
Boot Command Line Interface 329