Command History

Usage Information

Example

Version

Description

9.7(0.0)

Introduced on the S6000–ON.

9.5(0.0)

Introduced on the Z9000, S6000, S4810, S4820T, and MXL..

Use this command to add, edit, or delete an IPv6 RDNSS address and lifetime value. You can configure up to four IPv6 RDNSS addresses. You must specify a lifetime using the lifetime or infinite parameter.

Dell(conf-if-te-1/1)#ipv6 nd dns-server 1000::1 1

ipv6 route

Establish a static IPv6 route.

S6000

Syntaxipv6 route [vrf vrf-name] ipv6-addressprefix-length{ipv6- address interface interface ipv6-address} [distance] [tag value] [permanent] [weight weight-value]

To remove the IPv6 route, use the no ipv6 route [vrf vrf-name]ipv6- address prefix-length{ipv6-addressinterface interface ipv6-address} [distance] [tag value] [permanent] [weight] command.

Parameters

(Optional) Enter the keyword vrf followed by the name of the

vrf vrf-name

 

VRF to install IPv6 routes in that VRF.

ipv6-address

Enter the IPv6 address in the x:x:x:x::x format then the prefix

prefix-length

length in the /x format. The range is from /0 to /128.

 

NOTE: The :: notation specifies successive hexadecimal

 

fields of zeros.

interface

(OPTIONAL) Enter the following keywords and slot/port or

 

number information:

 

• For a 10-Gigabit Ethernet interface, enter the keyword

 

TenGigabitEthernet then the slot/port information.

 

• For a 40-Gigabit Ethernet interface, enter the keyword

 

fortyGigE then the slot/port information.

 

• For a Loopback interface, enter the keyword loopback

 

then a number from 0 to 16383.

 

• For a port channel interface, enter the keywords port-

 

channel then a number.

 

• For a Null interface, enter the keyword null then the Null

 

interface number.

IPv6 Basics

823

Page 823
Image 823
Dell 9.7(0.0) manual Ipv6 route, Dellconf-if-te-1/1#ipv6 nd dns-server 10001