Dell 9.7(0.0) manual Stack-ports Optional Enter the keywords stack-ports for, Status, Topology

Command

Modes

Command

History

Example (show system stack unit – disabled ports)

Example (show system brief)

stack-ports	(OPTIONAL) Enter the keywords stack-portsfor
status	information about the status or topology of the stack ports.
topology

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
Version 9.4(0.0)	Added support for the disabled-portsparameter .
Version 9.0.2.0	Introduced on the S6000.
Version 9.0.0.0	Introduced on the Z9000.
Version 8.3.19.0	Introduced on the S4820T.
Version 8.3.11.4	The brief parameter no longer displays the current Reload
	mode. To display Reload mode, use the show reload-
	type command. Modified the show system stack-unit
	command output to support Piece Part ID (PPID).

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.8.1.0 The Boot Flash field displays the code level for boot code

2.8.1.1and newer, while older boot codes display as "Present".

Version 7.7.1.0 Added Master Priority field.

Version 7.6.1.0 Introduced on the S-Series.

Dell#show system stack-unit 1 disabled-ports Disabled ports in stack-unit 1

Disabled

52

56

60

Dell#show system brief

Stack MAC : 90:b1:1c:f4:9b:79

Reload-Type		:	normal-reload [Next boot :
normal-reload]
--	Stack Info	--	ReqTyp
Unit	UnitType	Status
CurTyp		Version	Ports

144 Control and Monitoring