Dell 9.7(0.0) manual Access Control Lists ACL, Commands Common to all ACL Types, Remark

6

Access Control Lists (ACL)

Access control lists (ACLs) are supported by the Dell Networking OS.

Dell Networking OS supports the following types of ACL, IP prefix list, and route maps:

•Commands Common to all ACL Types

•Common IP ACL Commands

•Standard IP ACL Commands

•Extended IP ACL Commands

•Common MAC Access List Commands

•Standard MAC ACL Commands

•Extended MAC ACL Commands

•IP Prefix List Commands

•Route Map Commands

•AS-Path Commands

•IP Community List Commands

NOTE: For ACL commands that use the Trace function, refer to the Trace List Commands section in the Security chapter.

NOTE: For IPv6 ACL commands, refer to IPv6 Access Control Lists (IPv6 ACLs).

Commands Common to all ACL Types

The following commands are available within each ACL mode and do not have mode-specific options. Some commands in this chapter may use similar names, but require different options to support the different ACL types (for example, the deny and permit commands).

remark

Enter a description for an ACL entry.

Syntax	remark [remark-number] [description]
Parameters	remark-	Enter the remark number. The range is from 0 to
	number	4294967290.

NOTE: You can use the same sequence number for the remark and an ACL rule.

182 Access Control Lists (ACL)