Dell 9.7(0.0) manual Ntp authentication-key number md5 0 7 key, Md5

Usage Information

Related Commands

VersionDescription

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

The number parameter in the ntp trusted-keycommand must be the same number as the number parameter in the ntp authentication-keycommand. If you change the ntp authentication-keycommand, you must also change the ntp trusted-keycommand.

ntp authentication-key — sets an authentication key for NTP.

ntp authenticate — enables the NTP authentication parameters you set.

ntp authentication-key

Specify a key for authenticating the NTP server.

Syntax	ntp authentication-key number md5 [0 7] key
Parameters	number	Specify a number for the authentication key. The range is
		from 1 to 4294967295.
		This number must be the same as the number parameter
		configured in the ntp trusted-keycommand.
	md5	Specify that the authentication key is encrypted using MD5
		encryption algorithm.
	0	Specify that authentication key is entered in an unencrypted
		format (default).
	7	Specify that the authentication key is entered in DES
		encrypted format.
	key	Enter the authentication key in the previously specified
		format.
Defaults	NTP authentication is not configured by default. If you do not specify the option [0
	7], 0 is selected by default.
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1578 System Time and Date