Dell 9.7(0.0) manual Interface range, Dellconf#interface null Dellconf-if-nu-0#, Interface slot

Usage Information

Example

Related Commands

VersionDescription

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.4.1.0Introduced

You cannot delete the Null interface. The only configuration command possible in a Null interface is ip unreachables.

Dell(conf)#interface null 0

Dell(conf-if-nu-0)#

interface — configures a physical interface.

interface loopback — configures a Loopback interface.

interface port-channel — configures a port channel.

interface vlan — configures a VLAN.

ip unreachables — enables generation of internet control message protocol (ICMP) unreachable messages.

interface range

This command permits configuration of a range of interfaces to which subsequent commands are applied (bulk configuration). Using the interface range command, you can enter identical commands for a range of interface.

S6000

Syntaxinterface range interface {slot/port port} — port}, interface

{slot/port port} — port},...

Parameters
interface {slot/	Enter interface range and one of the interfaces and then
port port} —
	slot/port, port-channel, or VLAN number information. Select
port}, interface
	the range of interfaces for bulk configuration. You can enter
{slot/port
	up to six comma-separated ranges. Spaces are not required
port} — port},...
	between the commas. The ranges can include VLANs, port-
	channels, and physical interfaces.
	• For a port channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.

680 Interfaces