Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x guest-vlan

Configure a guest VLAN for limited access users or for devices that are not 802.1X capable.

Syntax

Parameters

Defaults

Command Modes

Command History

dot1x guest-vlan vlan-id

To disable the guest VLAN, use the no dot1x guest-vlanvlan-idcommand.

vlan-id

Enter the VLAN Identifier. The range is from 1 to 4094.

Not configured.

CONFIGURATION (conf-if-interface-slot/port)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series, S-Series, and E-Series.

Security

1411

Page 1411
Image 1411
Dell 9.7(0.0) manual Dot1x guest-vlan, Syntax Parameters Defaults Command Modes Command History