Dell 9.7(0.0) manual Trust, Related Wred-profile creates a Wred profile Commands, Diffserv, Dot1p

Related	wred-profile — creates a WRED profile.
Commands

trust

Specify dynamic classification (DSCP) or dot1p to trust.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

trust {diffserv [fallback] dot1p [fallback]}

diffserv	Enter the keyword diffserv to specify trust of DSCP
	markings.
dot1p	Enter the keyword dot1p to specify trust dot1p
	configuration.
fallback	Enter the keyword fallback to classify packets according
	to their DSCP or dot1p value as a secondary option in case
	no match occurs against the configured class maps.

none

CONFIGURATION (conf-policy-map-in)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

When you configure trust, matched bytes/packets counters are not incremented in the show qos statistics command.

Dynamic mapping honors packets marked according to the standard definitions of DSCP. The following lists the default mapping.

Quality of Service (QoS) 1287