Dell 9.7(0.0) manual Dot1x reauthentication interval seconds

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x reauthentication

Enable periodic re-authentication of the client.

Syntax	dot1x reauthentication [interval seconds]
	To disable periodic re-authentication, use the no dot1x reauthentication
	command.

Parameters

Defaults

Command Modes

Command History

interval	(Optional) Enter the keyword interval then the interval
seconds	time, in seconds, after which re-authentication is initiated.
	The range is from 1 to 31536000 (1 year). The default is3600
	(1 hour).

3600 seconds (1 hour)

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Security 1415