Dell 9.7(0.0) manual 1557

Related Commands

VersionDescription

7.7.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

forward-delay — changes the wait time before STP transitions to the Forwarding state.

max-age — changes the wait time before STP refreshes protocol configuration information.

max-age

To maintain configuration information before refreshing that information, set the time interval for the spanning tree bridge.

Syntax	max-age seconds
	To return to the default values, use the no max-agecommand.
Parameters	seconds	Enter a number of seconds the Dell Networking OS waits

before refreshing configuration information. The range is from 6 to 40. The default is 20 seconds.

Defaults

Command Modes

Command History

20 seconds

SPANNING TREE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

Spanning Tree Protocol (STP) 1557