Dell 9.7(0.0) manual Ip access-list standard access-list-name

Related	ip access-list standard — configures a standard ACL.
Commands
	permit — configures a permit filter.

ip access-list standard

Create a standard IP access list (IP ACL) to filter based on IP address.

Syntax ip access-list standard access-list-name

Parameters

Defaults

Command Modes

Command History

Usage Information

To delete an access list, use the no ip access-list standard access- list-namecommand.

access-list-	Enter a string up to 140 characters long as the ACL name.
name

All IP access lists contain an implicit “deny any,” that is, if no match occurs, the packet is dropped.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.10.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Increased the name string to accept up to 140 characters.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

7.4.1.0Added support for the non-contiguous mask and added the monitor option.

6.5.1.0Expanded to include the optional QoS order priority for the ACL entry.

Dell Networking OS supports one ingress and one egress IP ACL per interface.

Prior to Dell Networking OS version 7.8.1.0, names are up to 16 characters long.

192 Access Control Lists (ACL)