port-vlan-id Enter the keywords port-vlan-id to advertise the port
VLAN identification TLV.
vlan-name Enter the keywords vlan-name to advertise the vlan-name
TLV. This keyword is only supported on the C-Series and S-
Series.
Defaults Disabled.
Command
Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series. Added the vlan-name option.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands protocol lldp (Configuration) — enables LLDP globally.
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
advertise dot3-tlvAdvertise dot3 TLVs (Type, Length, Value).
S6000
Syntax advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-
size} command.
Parameters max-frame-
size
Enter the keywords max-frame-size to advertise the dot3
maximum frame size.
954 Link Layer Discovery Protocol (LLDP)