Dell 9.7(0.0) manual Command Modes Command History, Trigger

Command Modes

Command History

• For a 40-Gigabit Ethernet interface, enter the keyword

	fortyGigE then the slot/port information.
	• For a Port Channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
	• For a VLAN, enter the keyword vlan then a number from
	1 to 4094.
database	(OPTIONAL) Enter the keyword database to display
	messages when there is a change to the RIP database.
events	(OPTIONAL) Enter the keyword events to debug only RIP
	protocol changes.
trigger	(OPTIONAL) Enter the keyword trigger to debug only RIP
	trigger extensions.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

pre- 6.2.1.1 Introduced on the E-Series.

default-information originate

Generate a default route for the RIP traffic.

S6000

Syntaxdefault-information originate [always] [metric metric-value] [route-map map-name]

Routing Information Protocol (RIP) 1303