Related Commands

•The resolution value used to map RIP routes is not configurable. The RIP hop- count is automatically multiplied by 16 to scale it. For example, a RIP metric of 16 (unreachable) scales to 256, which considers the route to be DOWN.

•threshold metric – configures the metric threshold used to determine the UP and/or DOWN state of a tracked route.

•track ip route metric threshold – configures object tracking on the threshold of an IPv4 route metric.

IPv6 Object Tracking Commands

The following section describes the IPv6 object tracking commands.

The following object tracking commands apply to IPv4 and IPv6:

•debug track

•delay

•description

•show running-config track

•threshold metric

•track interface line-protocol

show track ipv6 route

Display information about all tracked IPv6 routes, including configuration, current tracked state (UP or DOWN), and the clients which are tracking an object.

Syntax

Parameters

Command Modes

Command History

Usage Information

show track ipv6 route [brief]

brief

(OPTIONAL) Display a single line summary of information for

 

tracked IPv6 routes.

•EXEC

•EXEC Privilege

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

8.3.12.0Introduced on the S4810.

8.4.1.0Introduced.

The following describes the show track ipv6 route command shown in the Example below.

1052

Object Tracking

Page 1052
Image 1052
Dell 9.7(0.0) manual IPv6 Object Tracking Commands, Show track ipv6 route brief