Defaults

Command Modes

[protocol

[process-id tag] ip-address]

static ip- address

ip-address

distance

Not configured.

CONFIGURATION

(OPTIONAL) Enter one of the routing protocols:

•Enter the BGP as-number then the IP address in dotted decimal format of the reverse path forwarding (RPF) neighbor. The range is from 1 to 65535.

•Enter the OSPF process identification number then the IP address in dotted decimal format of the RPF neighbor. the range is from 1 to 65535.

•Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal format of the RPF neighbor.

•Enter the RIP IP address in dotted decimal format of the RPF neighbor.

(OPTIONAL) Enter the Static IP address in dotted decimal format of the RPF neighbor.

(OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor.

(OPTIONAL) Enter a number as the distance metric assigned to the mroute. The range is from 0 to 255.

Command History

Related Commands

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Added support for VRF. Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

E-Series legacy command

show ip mroute — displays the routing table.

ip multicast-limit

To limit the number of multicast entries on the system, use this feature.

S6000

Syntax

ip multicast-limit [vrf vrf-name] limit

1014

Multicast

Page 1014
Image 1014
Dell 9.7(0.0) manual Static ip- address, Ip-address Distance, Ip multicast-limit vrf vrf-name limit