Dell 9.7(0.0) manual 839

Usage Information

VersionDescription

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.4.2.0Introduced on the E-Series TeraScale.

8.2.1.0Introduced on the S-Series.

7.8.1.0Introduced on the C-Series.

For the new settings to take effect, save the new CAM settings to the startup- config (write-memor copy run start), then reload the system.

The total amount of space allowed is 16 FP blocks. System flow requires three blocks and these blocks cannot be reallocated.

When configuring space for IPv6 ACLs, the total number of Blocks must equal 13.

Ranges for the CAM profiles are from 1 to 10, except for the ipv6acl profile which is from 0 to 10. The ipv6acl allocation must be a factor of 2 (2, 4, 6, 8, 10).

IPv6 Access Control Lists (IPv6 ACLs) 839