Dell 9.7(0.0) manual Timers basic, Update, Invalid

Command History

Example

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

7.6.1.0Introduced on the E-Series.

show running-config rip

!

router rip distribute-list Test1 in distribute-list Test21 out network 10.0.0.0

passive-interface GigabitEthernet 2/1 neighbor 20.20.20.20

redistribute ospf 999 version 2

timers basic

Manipulate the RIP timers for routing updates, invalid, holddown times, and flush time.

S6000

Syntax	timers basic update invalid holddown flush
	To return to the default settings, use the no timers basic command.
Parameters	update	Enter the number of seconds to specify the rate at which RIP
		routing updates are sent. The range is from zero (0) to
		4294967295. The default is 30 seconds.
	invalid	Enter the number of seconds to specify the time interval
		before routing updates are declared invalid or expired. The
		invalid value should be at least three times the update timer
		value. The range is from zero (0) to 4294967295. The default
		is 180 seconds.

1326 Routing Information Protocol (RIP)