Dell 9.7(0.0) Sflow, Snmp, Spanning, Tree, Static, Status, Tacacs+, Tftp, Trace-group, Trace-list

Command Modes

Command History

sflow	for the current sFlow configuration
snmp	for the current SNMP configuration
spanning-	for the current spanning tree
tree	configuration
static	for the current static route
	configuration
status	for the file status information
tacacs+	for the current TACACS+
	configuration
tftp	for the current TFTP configuration
trace-group	for the current trace-group
	configuration
trace-list	for the current trace-list configuration
uplink-	for the uplink state group
state-group	configuration
users	for the current users configuration
vlt	for the current VLT configuration
wred-profile	for the current wred-profile
	configuration

configured	(OPTIONAL) Enter the keyword configuration to display
	line card interfaces with non-default configurations only.
status	(OPTIONAL) Enter the keyword status to display the
	checksum for the running configuration and the start-up
	configuration.
compressed	(Optional) Enter the keyword compressed to display the
	compressed group configuration. Displays the compressed
	configuration by grouping all similar configurations. The
	compression is done only for interface related
	configurations.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

80 File Management