Version

Description

9.5(0.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.1.1.0

Introduced on the E-Series ExaScale.

7.8.1.0

Introduced on the C-Series for the port-channels and the S-

 

Series.

7.7.1.0Introduced on the E-Series.

Example

Dell(conf)# ip access-list extended iptv-channels

 

Dell(config-ext-nacl)# permit ip 10.1.2.3/24 225.1.1.0/24

 

Dell(config-ext-nacl)# permit ip any 232.1.1.0/24

 

Dell(config-ext-nacl)# permit ip 100.1.1.0/16 any

Related

ip access-list extended — configure an access list based on IP addresses or

Commands

protocols.

ip pim neighbor-filter

To prevent a router from participating in protocol independent multicast (PIM), configure this feature.

S6000

Syntaxip pim [vrf vrf-name] neighbor-filter {access-list}

Parameters

Defaults

Command Modes

Command History

To remove the restriction, use the no ip pim [vrf vrf-name] neighbor- filter {access-list}command.

vrf vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of

 

the VRF to prevent that VRF from participating in PIM.

 

NOTE: Applies to specific VRF if input is provided, else

 

applies to default VRF.

access-list

Enter the name of a standard access list. Maximum 16

 

characters.

none

 

CONFIGURATION

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1194

PIM-Sparse Mode (PIM-SM)

Page 1194
Image 1194
Dell 9.7(0.0) manual Ip pim neighbor-filter, Version Description 50.0