Dell 9.7(0.0) manual Ntp disable, Ntp multicast client multicast-address

VersionDescription

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

ntp disable

Prevent an interface from receiving NTP packets.

Syntax	ntp disable
	To re-enable NTP on an interface, use the no ntp disable command.
Defaults	Disabled (that is, if you configure an NTP host, all interfaces receive NTP packets)
Command	INTERFACE
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

ntp multicast client

To receive NTP information from the network via multicast, configure the switch.

Syntax	ntp multicast client [multicast-address]
	To disable multicast reception, use the no ntp multicast client
	[multicast-address]command.

System Time and Date 1573