Dell 9.7(0.0) manual Ip domain-list name

VersionDescription

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

ip domain-list

Configure names to complete unqualified host names.

S6000

Syntax	ip domain-list name
	To remove the name, use the no ip domain-listname command.
Parameters	name	Enter a domain name to be used to complete unqualified

names (that is, incomplete domain names that cannot be resolved).

Defaults

Command Modes

Command History

Usage Information

Disabled.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

To configure a list of possible domain names, configure the ip domain-listcommand up to six times.

If you configure both the ip domain-nameand ip domain-listcommands, the software tries to resolve the name using the ip domain-namecommand. If

762 IPv4 Routing