Dell 9.7(0.0) manual Mtu, Defaults Command Modes History Related Commands Ipv6-mac

Defaults

Command

Modes

Command

History

Related Commands

ipv6–mac-	Enter the keywords ipv6–mac-access-listthen the mac-
access-list	access-list name. The mac-access-list name allows a
name	maximum of 140 characters.

none

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

•ipv6 nd ra-guard enable — Allows you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the RA guard policy name and enter the RA guard policy configuration mode.

mtu

Enable the verification of the configured maximum transmission unit (MTU) value in the received RA packets.

Syntax	mtu value
	To reset the MTU value, use the no mtu value command.
Parameters	value	Enter the maximum transmission unit value in bytes. The

range is from 1,280 to 11,982 bytes.

Defaults

Command

Modes

Command

History

0

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

1030 Neighbor Discovery Protocol (NDP)