Dell 9.7(0.0) manual Optional Enter the keyword detail to display

Command Modes

Command History

Usage Information

	• For a port channel interface, enter the keywords port-
	channel then a number.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.
detail	(OPTIONAL) Enter the keyword detail to display the
	IGMPv3 source information.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series and C-Series.

7.5.1.0Expanded to support the detail option.

E-Series legacy command.

This command displays the IGMP database, including configured entries for either all groups on all interfaces, all groups on specific interfaces, or specific groups on specific interfaces.

The following describes the show ip igmp groups command shown in the following example.

Field	Description
Group Address	Lists the multicast address for the IGMP group.
Interface	Lists the interface type, slot and port number.
Mode	Displays the IGMP version used.
Uptime	Displays the amount of time the group has been
	operational.
Expires	Displays the amount of time until the entry expires.

648 Internet Group Management Protocol (IGMP)