Dell 9.7(0.0) manual Arp inspection-trust, Clear ip dhcp snooping

arp inspection-trust

Specify a port as trusted so that ARP frames are not validated against the binding table.

S6000

Syntax

Defaults

Command Modes

Command History

arp inspection-trust

Disabled

•INTERFACE

•INTERFACE PORT-CHANNEL

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.3.1.0Introduced on the E-Series.

8.2.1.0Introduced on the C-Series and S-Series.

Related	arp inspection — enables dynamic ARP inspection on a VLAN.
Commands

clear ip dhcp snooping

Clear the DHCP binding table.

Syntaxclear ip dhcp snooping {binding source-address-validation discard-counters [interface interface]}

Parameters

binding

source- address- validation discard- counters

Clears the binding table.

Clears discard counters from all the interfaces configured with IP Source Guard.

560 Dynamic Host Configuration Protocol (DHCP)