Dell 9.7(0.0) - page 751

*Enter an asterisk (*) to clear all learned IP routes.
ip-address
mask
Enter a specific IP address and mask in dotted decimal
format to clear that IP address from the routing table.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.9.1.0 Introduced VRF on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage
Information Use the vrf vrf-name attribute of this command to clear routes corresponding
to either a specific VRF or the default VRF.
You cannot use this attribute to clear routes corresponding to a management VRF.
Related
Commands ip route — assigns an IP route to the switch.
show ip route — views the routing table.
show ip route summary — views a summary of the routing table.
IPv4 Routing 751