Dell 9.7(0.0) Stack-unit priority, Example Status Example Topology Related Commands, Stack-number

Example (Status)

Example (Topology)

Related Commands

2/4	5/120	42	up	up
5/4	0/4	42	up	up
5/12	2/4	42	up	up

Dell#show system stack-ports status
Topology: Ring	Admin	Link
Interface Link Speed
(Gb/s)	Status	Status

--------------------------------------------

0/4	42	up	up
0/120	42	up	up
2/0	42	up	up
2/4	42	up	up
5/4	42	up	up
5/120	42	up	up
Dell#show system stack-ports topology
Topology: Ring
Interface	Connection
---------------------
0/4	5/4
0/120	2/0
2/0	0/120
2/4	5/120
5/4	0/4
5/120	2/4
Dell#

•reset stack-unit – resets the designated stack member.

•show hardware stack-unit – displays the data plane or management plane input and output statistics of the designated component of the designated stack member.

•show system (S-Series and Z-Series) – displays the current status of all stack members or a specific member.

stack-unit priority

Configure the ability of a switch to become the management unit of a stack.

Syntax	stack-unitstack-unit number priority 1-14
Parameters	stack-number	Enter the stack member unit identifier.
	1–14	This preference parameter allows you to specify the
		management priority of one backup switch over another,
		with 0 the lowest priority and 14 the highest. The switch with
		the highest priority value is chosen to become the
		management unit if the active management unit fails or on
		the next reload.
Defaults	0

1536 Stacking