Dell 9.7(0.0) manual Logging history size size

Usage	When you configure the snmp-servertrap-sourcecommand, the system
Information	messages logged to the history table are also sent to the SNMP network
	management station.
Related	show logging — displays information logged to the history buffer.
Commands

logging history size

Specify the number of messages stored in the Dell Networking logging history table.

Syntax	logging history size size
	To return to the default values, use the no logging history size command.
Parameters	size	Indicate a value as the number of messages to be stored.

The range is from 0 to 500. The default is 1 message.

Defaults

Command Modes

Command History

Usage Information

Related Commands

1 message

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

When the number of messages reach the limit you set with the logging history size command, older messages are deleted as newer ones are added to the table.

show logging — displays information logged to the history buffer.

1512 Simple Network Management Protocol (SNMP) and Syslog