Dell 9.7(0.0) manual Debug ip pim, Bsr, Packet in out, Register

Usage	If you use this command on a local VLT node, all multicast routes from the local
Information	PIM TIB, the entire multicast route table, and all the entries in the data plane are
	deleted. The local VLT node sends a request to the peer VLT node to download
	multicast routes learned by the peer. Both local and synced routes are removed
	from the local VLT node multicast route table. The peer VLT node clears synced
	routes from the node.
	If you use this command on a peer VLT node, only the synced routes are deleted
	from the multicast route table.

debug ip pim

View IP PIM debugging messages.

S6000

Syntax	debug ip pim [vrf vrf-name] [bsr events group packet [in
	out] register state timer [assert hello joinprune
	register]]
	To disable PIM debugging, use the no debug ip pim [vrf vrf-name]
	command or use the undebug allto disable all debugging command.
Parameters	vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
		the VRF to view IP PIM debugging messages corresponding
		to that VRF.
		NOTE: Applies to specific VRF if input is provided, else
		applies to Default VRF.
	bsr	(OPTIONAL) Enter the keyword bsr to view PIM Candidate
		RP/BSR activities.
	events	(OPTIONAL) Enter the keyword group to view PIM messages
		for a specific group.
	group	(OPTIONAL) Enter the keyword group to view PIM messages
		for a specific group.
	packet [in out]	(OPTIONAL) Enter the keyword packet to view PIM packets.
		Enter one of the optional parameters:
		• in: to view incoming packets
		• out: to view outgoing packets
	register	(OPTIONAL) Enter the keyword register to view PIM
		register address in dotted decimal format (A.B.C.D).
	state	(OPTIONAL) Enter the keyword state to view PIM state
		changes.

PIM-Sparse Mode (PIM-SM) 1189