Dell 9.7(0.0) Snmp-server enable traps, VersionDescription Series legacy command, Notification

VersionDescription

E-Series legacy command

snmp-server enable traps

Enable SNMP traps.

Syntaxsnmp-server enable traps [notification-type] [notification- option]

To disable traps, use the no snmp-server enable traps [notification- type] [notification-option] command.

Parameters	Enter the type of notification from the following list:
notification-
type	• bgp — Notification of changes in the BGP process.
	• config — Notification of changes to the startup or
		running configuration.
	• ecfm — Notification of changes to ECFM.
	• ecmp — Enable an ECMP trap to notify of ECMP or link
		bundle traffic imbalances.
	• envmon — For Dell Networking device notifications when
		an environmental threshold is exceeded.
	• isis — Notification of intermediate service traps.
	• lacp — Notification of changes.
	• snmp — Notification of RFC 1157 traps.
	• stp — Notification of a state change in the spanning tree
		protocol (RFC 1493).
	• vlt — Notification of virtual link trunking.
	• vrrp — Notification of a state change in a VRRP group.
	• xstp — Notification of a state change in MSTP (802.1s),
		RSTP (802.1w), and PVST+.
notification-	For the envmon notification-type, enter one of the following
option	optional parameters:
	•	cam-utilization
	•	fan
	•	supply
	•	temperature
	For the snmp notification-type, enter one of the following
	optional parameters:
	•	authentication
	•	coldstart

Simple Network Management Protocol (SNMP) and Syslog 1483