Dell 9.7(0.0) manual Clock summer-time recurring, End-month, End-time, End-year

Defaults

Command Modes

Command History

Related Commands

end-month	Enter the name of one of the 12 months in English. You can
	enter the name of a day to change the order of the display to
	time day month year.
end-time	Enter the time in hours:minutes. For the hour variable, use
	the 24-hour format; example, 17:15 is 5:15 pm.
end-year	Enter a four-digit number as the year. The range is from 1993
	to 2035.
offset	(OPTIONAL) Enter the number of minutes to add during the
	summer-time period. The range is from 1 to1440. The
	default is 60 minutes.
Not configured.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

clock summer-time recurring — sets a date (and time zone) on which to convert the switch to daylight saving time each year.

show clock — displays the current clock settings.

clock summer-time recurring

Set the software clock to convert to daylight saving time on a specific day each year.

Syntaxclock summer-timetime-zone recurring [start-week start-day start-month start-time end-week end-day end-month end-time [offset]]

System Time and Date 1567