Dell 9.7(0.0) manual Rate-shape kbps rate burst-KB

Usage Information

Related Commands

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

The default burst size is 100Kb. If a different value is required, you must configure the burst size to the required value.

rate police — specifies traffic policing on the selected interface.

qos-policy-input — creates a QoS output policy.

rate-shape

Shape traffic output as part of the designated policy.

S6000

Syntax	rate-shape [kbps] rate [burst-KB]
Parameters	kbps	Enter the keyword kbps to specify the rate limit in Kilobits
		per second (Kbps). Make the following value a multiple of 64.
		The range is from 0 to 40000000. The default granularity is
		Megabits per second (Mbps).
	rate	The range is from 10 to 40000.
	burst-KB	(OPTIONAL) Enter the burst size in KB. The range is from 0 to
		40000. The default is 100.

Defaults

Command Modes

Command History

Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.

QOS-POLICY-OUT

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

1270 Quality of Service (QoS)