Defaults

Command Modes

Command History

Not configured.

ROUTER RIP

This guide is platform-specific. For command information about other platforms, refer to the relevant FTOS Command Line Reference Guide.

The following is a list of the FTOS version history for this command.

VersionDescription

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

pre- 6.2.1.1

Introduced on the E-Series.

redistribute ospf

Redistribute routing information from an OSPF process.

S6000

Syntax

redistribute ospf process-id[match external {1 2} match

 

internal metric metric-value] [route-map map-name]

 

To disable redistribution, use the no redistribute ospf process-id[match

 

external {1 2} match internal metric metric-value]

 

[route-map map-name] command.

Parameters

process-id

Enter a number that corresponds to the OSPF process ID to

 

 

 

redistribute. The range is from 1 to 65355.

 

match external

(OPTIONAL) Enter the keywords match external then the

 

{1 2}

numbers 1 or 2 to indicated that external 1 routes or external

 

 

2 routes should be redistributed.

 

match internal

(OPTIONAL) Enter the keywords match internal to

 

 

indicate that internal routes should be redistributed.

 

metric metric-

(OPTIONAL) Enter the keyword metric then a number as

 

value

the metric value. The range is from 0 to 16.

 

route-map

(OPTIONAL) Enter the keywords route-mapthen the name

 

map-name

of a configured route map.

Defaults

Not configured.

 

Routing Information Protocol (RIP)

1321

Page 1321
Image 1321
Dell 9.7(0.0) manual Redistribute ospf process-id match external 1 2 match, Internal metric metric-value route-map map-name