Dell 9.7(0.0) manual Ntp server, Address key keyid prefer version number, Key keyid, Prefer

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.6(0.0)	Introduced on the S4810, S4820T, S5000, S6000, Z9000,
	and Z9500.

ntp server

Configure an NTP time-serving host.

Syntaxntp server[vrf vrf-name] {hostname ipv4-address ipv6-

address} [key keyid] [prefer] [version number]

Parameters	(Optional) Enter the keyword vrf and then the name of the
vrf vrf-name
	VRF to configure a NTP time-serving host corresponding to
	that VRF.

Defaults

Command Modes

Command History

ipv4-address	Enter an IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of
ipv6-address	NTP server.
hostname	Enter the hostname of the server.
key keyid	(OPTIONAL) Enter the keyword key and a number as the
	NTP peer key. The range is from 1 to 4294967295.
prefer	(OPTIONAL) Enter the keyword prefer to indicate that this
	peer has priority over other servers.
version number	(OPTIONAL) Enter the keyword version and a number to
	correspond to the NTP version used on the server. The range
	is from 1 to 4.
Not configured.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.6(0.0)	Added support for VRF.
9.4.(0.0)	Added support for VRF.

System Time and Date 1575