Dell 9.7(0.0) Number of Links, Link connected, Link Data, Number of TOS, Metric TOS 0 Metric

Usage Information

Example

VersionDescription

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.1 Introduced on the E-Series.

The following describes the show ip ospf process-iddatabase router command shown in the following example.

Item	Description
LS Age	Displays the LSA age.
Options	Displays the optional capabilities available on router. The
	following options can be found in this item:
	• TOS-capability or No TOS-capability is displayed
	depending on whether the router can support Type of
	Service.
	• DC or No DC is displayed depending on whether the
	originating router can support OSPF over demand
	circuits.
	• E or No E is displayed on whether the originating router
	can accept AS External LSAs.
LS Type	Displays the LSA type.
Link State ID	Displays the Link State ID.
Advertising Router	Identifies the router ID of the LSA’s originating router.
LS Seq Number	Displays the link state sequence number. This number
	detects duplicate or old LSAs.
Checksum	Displays the Fletcher checksum of an LSA’s complete
	contents.
Length	Displays the length in bytes of the LSA.
Number of Links	Displays the number of active links to the type of router
	(Area Border Router or AS Boundary Router) listed in the
	previous line.
Link connected	Identifies the type of network to which the router is
to:	connected.
(Link ID)	Identifies the link type and address.
(Link Data)	Identifies the router interface address.
Number of TOS	Lists the number of TOS metrics.
Metric
TOS 0 Metric	Lists the number of TOS 0 metrics.

Dell#show ip ospf 100 database router

OSPF Router with ID (1.1.1.10) (Process ID 100)

Open Shortest Path First (OSPFv2 and OSPFv3) 1123